What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
15.06.2025 02:56

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, what happens?
This is where the MOV conducts again, and dissipated the energy.
There are three different concepts here that are getting confused.
My son is possessed, now he has psychosis. Can someone help me?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
the problem then depends on "how fast does the fuse operate?".
Is homosexuality an excommunicable offense in Christianity?
A fuse is a non-resetable over current circuit protector.
[old diagram got deleted by accident]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What would explain Trump blaming Ukraine for starting the war with Russia?
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes the function of a fuse.
One
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
So, the voltage could go up to 500 volts, and the fuse will not open up.
I have a "fat pussy" and I'm super self cautions about it. Do guys think it's gross?
(Dc diagram shown, AC is similar).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but I think this circuit , shows a few more pieces.
Why did Obito, a supposed "bad person," do good things for Kakashi?
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What's the most valuable lesson you've learned in life, and how has it impacted your journey so far?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At one ohm, the resistor has a maximum of 1 watt power.
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
But it can get overloaded, and no longer works.
What legal actions can be taken if a neighbor's unleashed dog causes harm or injury?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–10[John johnson John Johnson ]
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
This one hit behind the barn.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It also is a device that limits the change in current flow.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
I post the exact comment here.
Barnstars:
First Sentence:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
eight
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
what exactly is a ‘surge’ protector?
It seems Mohan does not understand the difference between a comment and an Answer.
Upvotes:
In schematic diagrams this is the symbol for a fuse:
What is lightning?
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
Here is a simplified AC power diagram.
An AC voltage/ current source, and an ac inductive load.
The other is “what does a “fuse” do?”
One is “what exactly is in a ‘surge protector’ ? ”
Because the load is inductive, the current lags the voltage.(by a bit).
This device then solves the entire problem.
nine
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
But… the neutral is now “floating” because of the 1 ohm resistance.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There are two important concepts here.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
He then asserts :
[image of Common-mode choke]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Edit 2024–10.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What does a fuse do?
a photo is worth a thousand words.
At least they know the answer if they wanted it.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi